Modified Thompson PTC19

The aggregate forms a value that is the average of all the values of the input signal that are not outliers according to ASME PTC 12.1-2005 and produces an output signal that consists of a data point that has a timestamp corresponding to the end of the data group.

Configuration

Signal Name

The name of the signal at the ‘in’ port.

Operation

To use the average aggregate, the operation must be median.

Parameters

Use Only Good Quality

Only the datapoints with good Quality are used for calculation.

Default: enabled

Minimum Number Of Required Values

If set the calculation requires a minimum number of values for a good quality.

Default: unset

Good Data Signal Name

If set the filtered good data will be send to the output with this name.

Default: unset

Outlier Data Signal Name

If set the filtered outlier data will be send to the output with this name.

Default: unset

Max. Limit Signal Name

If set the filtered the upper limit for good data will be send to the output with this name.

Default: unset

Min. Limit Signal Name

If set the filtered the lower limit for good data will be send to the output with this name.

Default: unset

Output Signal Name

The name of the signal on the ‘out’ port. If empty, the Signal Name is the Output Signal Name.